ENSONIQ ASR-10 Manuel d'instructions télécharger pdf (Page 266)

Section 12 — Sequencer and Audio Track Concepts

About Audio Tracks 39

How to Prepare Song Audio Tracks:

The ASR-10 can playback two Audio Tracks at one time. Since the song can contain data on its

own pair of Audio Tracks, and the sequences that make up the song can also contain data on

their Audio Tracks, you must decide which pair you want to play and whether or not you want

to record Song Audio Tracks. Before you begin, make sure that you have the song selected on the

Edit/Seq•Song, Sequence Selection page. Then:

1. On the Command/Seq•Song, SET SONG ATRK PLAYBACK page, press the Enter•Yes

button.

2. On this sub-page you will set the PLAY value:

IF: THEN:

PLAY=SEQ ATRKS ONLY You will be preparing to play back both sequence Audio Tracks only,

and to disallow Song Audio Track recording and playback.

PLAY=SONG-A + SEQ-B You will be preparing to record and play back one Song Audio Track

using Audio Track A, and to play back the data on Audio Track B in

the sequences that make up the song. You will be unable to record or

play back from Song Audio Track B.

PLAY=SEQ-A + SONG-B You will be preparing to record and play back one Song Audio Track

using Audio Track B, and to play back the data on Audio Track A in

the sequences that make up the song. You will be unable to record or

play back from Song Audio Track A.

PLAY=SONG ATRKS ONLY You will be preparing to record and play back both Song Audio Tracks

only, and to ignore any data recorded on both Audio Tracks in the

sequences that make up the song.

3. Select the proper PLAY setting for your Audio Track recording using the Data Entry Controls,

and press Enter•Yes. The display will momentarily show COMMAND COMPLETED, and

you will be returned to the SET SONG ATRK PLAYBACK command page.

☞ A Note About Preparing Song Audio Tracks

When the Song is selected, the SEQ indicator light will always flash, whether or not the Song

contains data on either the Song Audio Tracks or any of the Sequence Audio Tracks in the

Sequences that make up the Song. This is done to ensure that you prepare the Audio Tracks

before attempting to record Song Audio Tracks, and so that the ASR-10 can check the sequences

that make up the Song to ensure that they all use the same Tempo and Time Signature.

Audio Tracks in “Chain Play”:

When using the “Chain Play” function to manually cue up a second sequence to play while one is

already playing, the second sequence will play its sequence tracks fine, but will not play its

Audio Tracks. This is due to the lack of necessary set-up time required to prepare the second

Sequence’s AudioSample data. You must first press Stop•Continue and then press Enter•Yes in

order to prepare the Audio Tracks.

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 389 390

Pas de commentaire

ENSONIQ ASR-10 Manuel d'instructions Page 266