ENSONIQ ASR-10 Manuel d'instructions télécharger pdf (Page 315)

Section 14 — Storage

Loading Instruments and Banks 5

Loading and Saving ASR-10 Instruments

Loading an Instrument

You can load up to eight different instruments into the ASR-10 at once (within the limits of

memory). First, insert a disk containing one or more instrument files into the disk drive.

• Press Load. The LOAD indicator flashes.

• Press Instrument. The display might look like this:

LOAD INST STOP

When the LOAD indicator is flashing, the ASR-10 is showing you disk files (think of it as a

question mark - the ASR-10 is saying “Load the file showing on the display?”). Pressing the

Up/Down Arrow buttons takes you through the files on the disk. If there are none, the display

will read “NO INST OR BANK FILES.”

Whenever a disk file is displayed as above, you can press the Left or Right Arrow button to see

the size of that file in Blocks (a Block is 256 samples; 4 Blocks=1K samples). Press the Left or

Right Arrow button again to return to the file name.

• Use the Data Entry Slider or the Up/Down Arrow buttons to view the various instrument files

on the disk. Each file has its own File Number. When an instrument file is showing, the INST

indicator is lit. The BANK indicator will light when a bank file is showing.

• Find the instrument you want to load, and press Enter•Yes. The display will say PICK

INSTRUMENT BUTTON. The ASR-10 is asking in which instrument location you want to

load the sound into.

• Press any of the eight Instrument•Sequence Track buttons. The ASR-10 will begin

immediately loading the instrument into the selected location. The display reads LOADING

FILE… and the left red LED flashes while the instrument is being loaded.

LOAD INST STOP

Once the instrument has been loaded, the display briefly shows “FILE LOADED.” The left red

LED above the Instrument•Sequence Track button stops flashing and remains solidly lit,

indicating that there is now an instrument loaded in that location which can be selected by

pressing that button.

If you tell the ASR-10 to load an instrument into a location that already has an instrument loaded

(left red LED lit), the new instrument will be loaded into that location and the one that was there

will be automatically deleted.

1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 389 390

Pas de commentaire

ENSONIQ ASR-10 Manuel d'instructions Page 315