ENSONIQ ASR-10 Manuel d'instructions Page 291

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 390
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 290
Section 13 — Sequencer and Audio Track Parameters
Seq•Song Commands 9
CMD
ERASE ALL AUDIOSAMPLES
SEQ•SONG
Press Command / Seq•Song / scroll using the arrow buttons
This command will erase all AudioSamples within the current SONG + ALL SEQS (Project) file
from RAM, SCSI, or BOTH. This will not erase SCSI resident AudioSamples that are triggered by
other SONG + ALL SEQS (Project) files.
Press Enter•Yes. The display shows:
CMD SEQ
STOP
Use the Data Entry Controls to select RAM, SCSI, or BOTH.
Press Enter•Yes. The display asks “ERASE ASMPLS?”.
Pressing Enter•Yes will execute the command.
Pressing Cancel•No will abort the command.
CMD
SET SONG ATRK PLAYBACK
SEQ•SONG
Press Command / Seq•Song / scroll using the arrow buttons
This command determines which pair of Audio Tracks (Song or Sequence) will be played when
the Song is selected. It also enables or disables Song Audio Track recording.
Press Enter•Yes. The display shows:
CMD SEQ
STOP
Range: SEQ ATRKS ONLY, SONG-A + SEQ-B, SEQ-A + SONG-B, SONG ATRKS ONLY
Pressing Enter•Yes will execute the command. If any Audio Tracks have been recorded, the
PREPARING AUDIO TRACKS message will be briefly displayed while the Audio Tracks are
cued up for playback.
This parameter defaults to PLAY=SEQ ATRKS ONLY upon booting.
If the SONG is not selected when the SET SONG ATRK PLAYBACK command is invoked, the
song will be automatically selected.
If the song is selected, and this is set to PLAY=SEQ ATRKS ONLY, trying to enter record on an
Audio Track results in the NOT SET FOR SONG ATRK message.
IF: THEN:
PLAY=SEQ ATRKS ONLY You will be preparing to play sequence Audio Tracks only, and to disallow Song
Audio Track recording and playback.
PLAY=SONG-A + SEQ-B You will be preparing to record and play back a Song Audio Track using Audio Track
A, and to play the data on Audio Track B in the sequences that make up the song.
You will be unable to record or play back from Song Audio Track B.
PLAY=SEQ-A + SONG-B You will be preparing to record and play back a Song Audio Track using Audio Track
B, and to play the data on Audio Track A in the sequences that make up the song.
You will be unable to record or play back from Song Audio Track A.
PLAY=SONG ATRKS ONLY You will be preparing to record and play back Song Audio Tracks only, and to ignore
any data recorded on both Audio Tracks in the sequences that make up the song.
Vue de la page 290
1 2 ... 286 287 288 289 290 291 292 293 294 295 296 ... 389 390

Commentaires sur ces manuels

Pas de commentaire