ENSONIQ ASR-10 Manuel d'instructions télécharger pdf (Page 91)

Section 5 — Effect Concepts ASR-10 Musician’s Manual

6 Selecting Effects

Loading and Saving ASR-10 Effects

Loading an Effect File

You can load an effect from disk into the internal memory of the ASR-10. The effect will load into

the Bank effect location, replacing whatever effect was there previously.

First, insert a disk containing one or more effect files into the disk drive.

• Press Load. The LOAD indicator flashes.

• Press Effects. The display looks something like this:

LOAD STOP

FILE 1 MONDO REVERB

When the LOAD indicator is flashing, the ASR-10 is showing you disk files. Pressing the

Up/Down Arrow buttons takes you through the effect files on disk. If there are none, the display

will read NO EFFECT FILES.

Whenever a disk file is displayed as above, you can press the Left or Right Arrow button to see

the size of that file in Blocks (a Block is 256 samples; 4 Blocks=1K samples). Press the Left or

Right Arrow button again to return to the file name.

• Use the Data Entry Slider or the Up/Down Arrow buttons to view the various effect files on

the disk. Each file has its own File Number.

• Find the effect you want to load, and press Enter•Yes. The ASR-10 will load that effect into

the BANK effect slot. When finished, the display will read DISK COMMAND COMPLETED.

Saving an Effect to Disk

Use the SAVE BANK EFFECT command to save an effect to disk. If you wish to save, as a

separate effects file, either a ROM effect or an INST effect, you must first copy the effect into the

BANK effect using the COPY CURRENT EFFECT parameter on the Command/Effects page (see

Section 6 — Effect Parameters) and then save it.

• Insert a formatted disk into the drive.

• Press Command, then press Effect.

• Press the Left or Right Arrow button until the display reads SAVE EFFECT.

• Press Enter•Yes.

• Edit the effect name (if necessary):

The display shows the current name of the effect, with a cursor (underline) beneath the first

character. If you want to give the effect a new name, do so at this time. Use the Data Entry

Slider or the Up/Down Arrow buttons to change the underlined character, then press the

Left/Right Arrow buttons to move the underline. Repeat until the display shows the name you

want. If you are saving a ROM effect, the name will not be able to be edited (if you don’t need to

rename the effect, just skip this step).

• Press Enter•Yes. The display will read SAVING <FILE NAME> while the effect is being

saved.

• If there is already an effect file with the same name on the disk, the display will ask DELETE

OLD VERSION? Press Enter•Yes to save the effect, replacing the one on the disk. Or press

Cancel•No to abort the procedure.

• If there is not enough free space on the disk, the display will show NOT ENOUGH DISK

SPACE. Save the effect to another disk (or delete some files from the disk).

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 389 390

Commentaires sur ces manuels

Pas de commentaire

ENSONIQ ASR-10 Manuel d'instructions Page 91

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques ENSONIQ ASR-10